full- spectrum direct-reading spectrometer developed by Acculab USA , which is used for trace elemental analysis in diverse samples (soluble in hydrochloric acid, nitric acid , hydrofluoric acid, etc.. )   .

The instrument offers capabilities with automatization, stability, reliability and ease of use   .

It is currently widely applies in various fields of rare earth, geological, melallurgical, chemical, enviromental, clinicL MEDICINE, petroleum, semiconductor, food, biological samples, criminal science and   agricultural

research, etc..

Application Fields:

Characteristic :

• Silicon industrial magnetic materials.
• Metallurgical analyze As, Bi, Pb, Sb, Sn and other impurity elements which effect greatly the metalic materials quality.
• Water analysis: analyze 8 heavy metal elements.
• Geological, minera: analyze Ca, Mg, Na, Fe, Cu, Mn, Zn, Co, Ni, Nu, Ag and other elements in the rock samples.
• Petrochemical and industrial: Analyze over 30 elements in crude oil, mainly Fe,Na, Mg, Ni, V, Ca, Pb, Mo, Mn, Cr, Co, Ba, As, etc..

•Pharmaceutical, health, agricultural, enviromental and Food safety.

Advantage

Stable, advanced solid-state RF power :

The instrument employs the solid-state RF power developed by Acculab Usa Instrument Co. , which is compact and delivers reliable performance with the power stability and safety, to further improve the instrument’s stability and security.

Superb optical system :

Adopting the echelle-prsm cross-dispersion type polychromator, elegant optical oplimization design maximizes the flux whilst enabling the exceltent spectral resolution. No movable optical components achieves unparalleled

long-term stability: Uitra-low stray light design with the unique optical design greatty reduces the background interference and further improves the detection llmit. A nighly efficient N.distributed purge system for the optical tank combined with the high-quality optics ensures deep UV analysis. especially P. S.As. etc..

Excellent pertormance detector :

Employing the CID detector which is advanced,mature and stable. largest size active area.megapixel. Full-frame Imaging ability to capture the entire ICP-OES spectrum (165-900 nm) permits quantitative analysis Non-destruetive readout improves the signal-to-noise rabo of weak analyte lines and ensures the precision of results. whst enabling cata acqurement and anaysis faster than CCD Excellent linear dynamic range and inherent anti-blooming capability aliow the measurement of wuak analyte emission signals adjacent to intense emission signals. whilst providing flexibility to choose the ideal wavelength for a method fallemative secondary and tertiary lines to overcome interferences)

Fast,accutate auto-matching :

The load terminals employs the fuil-automatic matching technology developed by Acculab Instrument Co.,Ltd., features fast matching.high precision. etc,which could achieve maximum output power. enhance power efficiency, ensure the stability of the instrument whilst facilitating ignition.

Ultra-fast analysis speed :

The analyst can set any suitable integration time for all the analytical lines in one exposure to achieve optimal measurement. or acquire the intensity integral value in the end of the exposure to enable the analysis faster, or specify any one or several specific Line(s)to read-out (the read-out time<2ms)

Powerful software analysis function :

Software is easy to operate and intuitive, it offers the capability with qualitative, semi-quantitative and quantitative analysis, instrument diagnostics. Intelligent optimization, flexible full-spectrum research function, strong offline reprocessing. Scientifically intelligence background correction and interference cancellation algorithm. Which enable the analysis more professional and accurate.

Advanced sample introduction system :

The sample introduction system is efficient and stable, equipped with various nebulizers and spray chambers, it can also be equipped with high solids nebulizer. Hydrogen fluoride-resistant nebulize0.etc.as per required. Besides the auto sampler developed by Acculab facilitates the operation. And further improves the analysis efficiency.

IDEAL FOR :

• Incoming raw material
• Field testing
• Final production release
• Products pricing

HIGH PERFORMANCE :

• Wavelength repeatability < 05 nm
• Wavelength accuracy < 2 nm
• Signal to noise ratio > 10000:1
• Analysis time < 10s

Industries :

• Grain, OiIseed,Processing, Flow Milling, Starch,Production, Sugar Production, Ethano1 Production, Raw Material of Feed, Feed fiinaI Productions

PARAMETERS :

Moisture, Protein,Fat/OiI,Ash, Fiber,Starch,Amino Acid, Sugar, Dry matter and more

(granular solid, powder, paste, liquid, etc ) with multiple parameters such as moisture, protein, fat, ash,starch and fiber within very short time.

The measurement is non-intrusive and requires minimal sample preparation.Users have access to a rich set of existing callbrations available from manufacturer or they can easily build own calibration with easy-to-use software tools and technical support.

High-performance NIR spectrometer with DMD (Digital Micra-mirror Device) technology.

Rich selection ot accessories & optional disposable sample cups support various application conditions. Large 2Smm-diameter light aperture ensures fast and repeatable measurement.

Built-in lithium battery (optional) enables fast and easy on-site analysis and portable applications, Bottomilluminated sample cup suitable for various sample farms-solid, paste, powder and liquid. Durable all-metal body construction and carry handle

Instrument’s functions, except one key power switch, are all controlled by computer, which greatly improves its automaticity

Reduce the complexity and repetitiveness of manual sampling Significantly ease the burden of operator

Good Assistant for Sample Analysis :

• Abundant cup position
• Stable performance
• Precise cup shift
• Good repeatability
• Long operating life
• Easy to operate and maintenance

Application Fields :

Complete automatic sampling cooperating with ICP  and samples from various fields like environmental protection, food, agriculture, metallurgy, water quality, epidemic prevention, medicine and health, etc.

Faster Shifting Speed :

Shifting fast

It only takes less than 4 seconds moving from cleaning cup position (i.e., No. 0 cup position)to the farthest one, in a stable and reliable way.

Better Stability

Stable shift with low noise

The X, Y, Z axes are driven by stepping motor and trapezoidal lead screw, with high precision,

stable movement and low noise.

More Precise Shift

Precise shift, good repeatability

Test result indicates no error is found in over one thousand of shifts in single point.

More Reasonable Arrangement

Abundant cup position, reasonable arrangement

Reagent cups and sample cups are arranged neatly and in order.

More User-friendly Peristaltic Pump Setting

Peristaltic pump rotates stably, with fluent fluid infusion and low noise.

Longer Operating Life

Long operating life and good corrosion resistance

The cover of auto-sampler is made of plastic, which is of long life and excellent corrosion resistance performance, extremely suitable to use in laboratory.

More delicate and practical appearance

Fashionable look

Whole plastic cover is designed by professional ID designer, which is beautiful and practical.

Technical Index :

• Capacity of sampling plate: 130 sample cups and 6 reagent cups
• Cup volume: sample cup of 15ml; reagent cup of 50ml
• Volume of cleaning solution bottle: 1LS
• Power supply: 220V±10%, 50hz±1HZ
• Power: peak power < 100W
• Communication interface: standard RS232 interface

Standard Configuration :

1.3 sampling plates with a total of 136 cup positions

2.a set of sampling cups

3.a peristaltic pump

4.Precise trapezoidal lead screw driven X, Y, Z axes movement device

5.19 V power adapter

6.3 motor drivers

NIR spectrophotometer is a spectrophotometer with grating monochromator. This instrument is for rapid

non-destructive analysis of oil, alcohol, beverage and other liquids. The wavelength range is 900nm2500-nm. The procedure is extremely convenient.

Fill the cuvette with the sample and place it on the sample platform of the instrument.

Click in the software to obtain the NIR spectrum data of the sample in about one minute. Combining the data with the corresponding NIR data model, various components of the tested sample can be obtained at the same time.

• Easy to No sample preparation is required, and the sample is not damaged.
• Wavelength range is 900nm-2500nm.
• The main parts performance is the international
• Built-in high-quality PTFE reference module and polystyrene wavelength standard Automatic reference calibration and monitoring wavelengths ensure accurate and stable measurement results.
• The instrument monitors the ambient temperature and humidity in real time and stores it in the spectrum file, which is convenient for users to check and optimize the measurement

the UV-Vis spectrophotometer is designed to meet high requirement for precision measurement in the research and productionof organic chemistry, biochemistry, medical testing, food testing, environmental protection, water testing industry,etc.

The latest ARM system and long optical system ensure high accuracy and good stability of the instrument.

They are the best choice of high quality spectrophotometer.

Features :

1. 10.1 inches high resolution TFT colored capacitive touch screen and windows Graphic interface.
2. Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNAProtein test, multi-wavelength test, etc
3. In-house massive memory is capable of saving up to 1024M for test data & working curves.
4. Supports USB & SD card storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage.
5. Socket type deuterium lamp and tungsten lamp can make lamps switching without optics debugging and easier to be replaced.
6. Large room for samples can hold cuvettes of various specifications.
7. Extensive accessories are optional, such as auto 8-cell holder, peltier/sipper system, reflection accessories, 21 CFR compliant software, etc.

the UV-Vis spectrophotometer is designed to meet high requirement for precision measurement in the research and production of organic chemistry, biochemistry, medical testing, food testing, environmental protection, water testing industry,etc. The latest ARM system and long optical system ensure high accuracy and good stability of the instrument. They are the best choice of high quality spectrophotometer.

Features:

Xenon lamp can start testing directly without preheating. be guaranteed at least 3-year for the lamp.

Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNAProtein test, multi-wavelength test, etc

In-house massive memory is capable of saving up to 1024M for test data & working curves.

Supports USB & SD card storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage.

Large room for samples can hold cuvettes of various specifications.

Extensive accessories are optional, such as auto 8-cell holder, peltier/sipper system, reflection accessories, 21 CFR compliant software, etc.

can be equipped with a refractive index detector and an evaporative light scattering detector.

Features:

■ On-line cleaning function of the plunger rod: The high-pressure constant-current pump adopts a double seal ring design to clean buffer salts, reduce the wear of key components, and extend the service life.
■ Flow monitoring function: real-time monitoring of the mobile phase, dual alarm design, when the set value is reached, the system will alarm or automatically stop the pump, effectively protecting the HPLC system.
■ Three measurement methods: dual wavelength detection, wavelength time program and pump stop scan can correspond to different measurement needs.

Instrument features

Ø The optical system design of double beam reduces the background interference and improves the accuracy and precision of the test.
Ø The receiving devices of the instrument are devices, which ensure the high performance and stability of the instrument.
Ø The control of the instrument (such as grating conversion, filter conversion, receiver conversion, wavelength scanning, etc.) is all controlled by the computer, and the interface is USB2.0, which makes the connection of the instrument simple and greatly improves the communication rate.
Ø Optional glass integrated optical testing system can automatically detect the visible transmission ratio (TU), direct solar transmission ratio (Te), direct solar reflection ratio (pe) and other related parameters of architectural glass.
Ø Used in conjunction with the glass hemisphere emissivity tester, the total solar transmittance ratio (g) and the shading coefficient (Se) of various window glass components to solar radiation heat can be obtained.
Ø Optional special sample testing accessories are available.
Ø Software setting import function, can import data in text format.
Ø Real-time measurement of sample data and data export of test results.
Ø Software can be run under Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10.

Functional Features

ØThe use of the classical Czerny-Turner optical structure with its simple structure, high precision and good spectral resolution.

ØThe use of dual grating, dual receiver design, to ensure that the instrument can work in the UV-visible, near infrared region (UV-VIS-NIR) the advantages of the full range of wavelengths.

ØThe receiving devices are all  devices, which ensure the high performance and stability of the instrument.

ØThe control of the instrument (such as grating conversion, filter conversion, receiver conversion, wavelength scanning, etc.) is all controlled by the computer, and the interface is USB2.0, which makes the connection of the instrument simple and greatly improves the communication rate.

ØThe slit width can be selected in 7 steps, and the user can choose any according to the actual needs.

ØEnglish operating software with simple and easy to understand function selection.

ØGlass comprehensive optical test system software is optional